ripwire-before-you-build

Before you build — with ripwire

Routing: • Writing ONE symbol (fn/class/helper) and want to reuse rather than reinvent → ripwire-reuse-first. • You've already written the change and want the pre-submit check → ripwire-change-check. • You want to judge whether the code you wrote got better/worse → ripwire-quality-bar. • Restructuring EXISTING code (not new work) → ripwire-fresh-eyes. • Not sure which skill? → ripwire-router.

<dir> = repo root. FEATURE/APPROACH = your task in 2–4 plain words; SYM = a representative symbol. Run only the sections your question needs — they share the same building blocks.

Common first move — recall + reusable blocks

Almost every section starts here; do it once. One-call shortcut: ripwire <dir> --pack-task="FEATURE" --legend=compact assembles the recall + --for ranking + top bodies + caller signatures + notes + tests_to_run into ONE bundle under one token budget — reach for it first instead of firing the calls below one at a time; drop to the individual calls only when you need a specific section's full output.

• Recall prior decisions — ripwire <dir> --recall="FEATURE" → full bodies of the most relevant markdown docs (planning/design notes, READMEs) ranked by relevance. If a doc already covers this, read it fully — the decision may be made. Look for explicit "rejected" / "future work" language.
• Reusable building blocks — the one-call write-mode bundle — ripwire <dir> --for="FEATURE" → <sigs> ranked by task-relevance, each carrying the quality lens in the same call: cx/ccx (complexity), in/amp (reuse count / change-amplification), churn (recent-commits), clone="1" (duplicated), tested="1", plus the inline <doc> block. That's read-context-and-quality-signal in ONE call — you learn what to reuse AND what's fragile (high-churn, high-amp, cloned, or untested) before you write a line, not after. High-in symbols are already widely composed — prefer extending them over reimplementing; treat a high-churn/high-amp one as something to touch carefully and test around.
• The shape to imitate for each new symbol — ripwire <dir> --exemplar=fn|method|class|struct|iface|var --legend=compact or --exemplar="<the sub-task in words>" (top match's kind inferred) → the repo's single best-in-class instance of that shape — cognitive complexity must clear an eligibility ceiling first (a blob can never win no matter how reused/tested), then among eligible candidates it's ranked tested=1 first, highest fan-in second, lowest cognitive-cx as the final tie-break — full body under <bodies>. Run it per new symbol the feature adds so each one copies a proven shape (structure, error handling, naming) instead of being invented from memory. (Deep-dive on exemplar-by-ROLE → ripwire-reuse-first.)
• Implementing against an interface? — ripwire <dir> --lego=I --legend=compact (or --lego=file:I to disambiguate a same-named type) → the interface's method contract (the exact signatures you must satisfy) plus every existing implementor, own-language only. Read one existing impl as the template so your new one matches the house pattern (method order, error handling, registration) instead of guessing the shape from the interface alone. The single highest-value call when the thing you're building has to satisfy an I.

Feasibility spike — "is this approach even viable?"

After the recall + --for above:

1. If highly-relevant symbols already exist with in > 0, the approach is partially implemented — build on it. If --recall shows it was decided against, stop.
2. Integration seams — ripwire <dir> --seams --legend=compact → <seams> (untested cross-module edges). If your approach must connect two modules with no test-covered seam between them, that's an integration cost.
3. Coupling cost — ripwire <dir> --deps --legend=compact (skim <godfiles> + shape=). Adding a dependency on a god-file adds coupling cost for every future change — flag it. → Verdict: "build on existing" / "greenfield but seams exist" / "needs new seam, flag risk".

Plan — "give me the ordered implementation steps"

1. Recall + --for (above) — check whether any existing symbol already solves part of the problem. Low in= = an underused candidate to extend or replace; high in= = load-bearing, extend cautiously.
2. Integration seams — ripwire <dir> --seams --legend=compact. Each seam is a wiring point; your plan should name which seam(s) the new code wires through, and add a test at each new seam it creates.
3. Impact of anything you'll modify — ripwire <dir> --impact=SYM --legend=compact. Large reaches= → plan a staged rollout or a compatibility shim. → Plan: ordered steps (recall → design → wire seams → write tests → implement), each naming the specific file+symbol to touch, the blast radius of any modification, and its test gate (from --affected). Flag any step that creates a new seam without a test.

Interface — "what should the boundary / API look like?"

1. Neighborhood of the subsystem — ripwire <dir> --around=SYM --legend=compact --metrics [--around-depth=2] → the ego graph with ranks + call edges. --metrics is what adds the in= fan-in annotation (bare --around emits none); high-in= symbols are already acting as the de-facto API surface.
2. The seam it lives on — ripwire <dir> --seams --legend=compact. If your subsystem straddles a <seam from="X" to="Y">, that's where the interface belongs.
3. Who currently crosses the boundary — ripwire <dir> --callers=SYM --legend=compact for the top 2–3 in the ego graph. Callers from outside the subsystem's directory are the external clients the interface must serve.
4. What to hide — ripwire <dir> --deps --legend=compact, skim instab=. High-instability internal files (leaves) stay behind the interface; stable (low-instability) files may be safe to expose. → Proposal: the 3–5 high-fan-in, called-from-outside symbols that form the natural API surface, the seam they live on, and the internal symbols to hide. Write it in terms of callers' needs, not internals.

Sizing rubric — "how big is this change?"

1. Blast radius — ripwire <dir> --impact=SYM --legend=compact → reaches="N" is the blast-radius symbol count (count distinct p= files for the file count); defs="D">1 means overloads, each a separate blast root.
2. Affected tests — ripwire <dir> --affected=fileA.cpp,fileB.h --legend=compact (the files defining SYM, from --impact). tests="0" = no test cover — flag it.
3. Caller-stack depth — ripwire <dir> --callers=SYM --legend=compact, then spot-check --callers=<top-caller> one level up. A 2-hop caller graph is a tactical change; 5+ hops is architectural.
4. Hidden coupling — ripwire <dir> --cochange=fileA.cpp --legend=compact; surprising="1" partners must be verified manually even if not in the blast radius. → Classify: local (≤5 blast, tests exist) / moderate (5–20) / wide (>20 or no tests).

Honesty

ripwire maps structure, not data flow; seams/impact are name-based (dynamic dispatch/callbacks/macros can be missing). Compose from what exists; note what's genuinely missing rather than reinventing it.